Ferrocene-Based N-Heterocyclic Silylenes: Monomeric Silanechalcogenones, Silanimines, Silirenes, and Insertion Products with P4.

The stable ferrocene-based N-heterocyclic silylenes fc[(N{B})2Si] (A; fc = 1,1'-ferrocenylene, {B} = (HCNDipp)2B, Dipp = 2,6-diisopropylphenyl) and fc[(NDipp)2Si] (B) are compared in a study focussing on their reactivity towards a range of small to moderately sized molecular substrates, viz. P4, S8, Se8, MesN3 (Mes = mesityl), RC≡CH, and RC≡CR (R = Ph, SiMe3). The Dipp-substituted congener B exhibits a more pronounced ambiphilicity and is sterically less congested than its 1,3,2-diazaborolyl-substituted relative A, in line with the higher reactivity of the former. The difference in reactivity is obviously due more to electronic than to steric reasons, as is illustrated by the fact that both A and B react with the comparatively bulky substrate MesN3 under mild conditions to afford the corresponding silanimine fc[(N{B})2Si=NMes] and fc[(NDipp)2Si=NMes], respectively. The heavier ketone analogues fc[(N{B})2Si=E] (E = S, Se, Te) are readily available from A and the corresponding chalcogen. In contrast, the reaction of the more reactive silylene B with elemental sulfur or selenium is unspecific, affording product mixtures. However, fc[(NDipp)2Si=Se] is selectively prepared from B and (Et2N)3PSe; the Te analogue is also accessible, but crystallises as head-to-tail dimer.

Controlled Ring Opening of a Tetracyclic Tetraphosphane with Twofold Metallocene Bridging.

A direct route to a doubly ferrocene bridged tetracyclic tetraphosphane 1 was developed via reductive coupling of Fe(CpPCl2)2 (2 a), where a chlorine terminated linear P4-compound 3 could be identified as an intermediate. Selective P-P bond activation was further achieved by reacting 1 with elemental selenium or [Cp*Al]4, where regioselective insertion of Se or Al atoms resulted in ferrocenylene bridged [P4Se] (4) or [P4Al] (7) moieties. Compound 7 can be transformed to a hydrogen terminated linear P4 species, 8, with protic solvents. Methylation of compound 1 with MeOTf, proceeds via intermediate formation of monomethylated species 5, which gradually produced Me2-terminated dicationic 6, again containing a linear P4-unit. Besides spectroscopic characterization, the structural details of compounds 1, 4, 6, and 8 could be determined by SC-XRD. Moreover, DFT calculations were used to rationalize the reactivity of 1, derived compounds and intermediates. As a key feature, 1 undergoes ring opening polymerization to a linear polyphosphane 9.

Gradual Coordination and Reversible P-P Bond Activation of a P3 -Unit with Transition Metal Carbonyls.

Coordination of a stereochemically defined P3 -chain to a series of transition metal carbonyls [M(CO)x ]z- (M = Mn (x = 5, z = 1), Fe (x = 4, z = 2) or Co (x = 4, z = 1)) is explored using a [3]ferrocenophane scaffold. A gradual transition from η1 -, η2 - to Î·3 -coordination is observed where in the η2 -mode the terminal positions of the phosphorus chain are bridged. With an excess of cobalt carbonyl successive P-P bond activation and gradual separation of the central phosphorus atoms from the phosphorus chain has been observed. This process is reversible and with suitable reagents such as methyl lithium, the P3 -unit is regenerated in stereospecific manner. The bonding situation and steps of the gradual P-P bond activation are investigated by DFT calculations as well as experimental methods (e.g., NMR spectroscopy, X-ray crystallography).

At the limits of bisphosphonio-substituted stannylenes.

Donor stabilization of Sn(II) and Pb(II) halides with 1,1'-ferrocenylene bridged bisphosphanes has been explored for Fe(C5 H4 P(C6 H5 )2 )2 (dppf), and Fe(C5 H4 PH(C4 H9 ))2 . These bisphosphanes are reacted with SnBr2 and PbCl2 with and without additional Lewis acid (AlCl3 ) forming acyclic and cyclic donor adducts from which the latter represent bisphosphoniotetrylenes. Since dynamic exchange in solution is observed, characterization includes solution and solid-state NMR in addition to SC-XRD, amended by DFT calculations.

A complete series of N-heterocyclic tetrylenes (Si-Pb) with a 1,1'-ferrocenediyl backbone enabled by 1,3,2-diazaborolyl N-substituents.

The use of bulky 1,3,2-diazaborolyl N-substituents has allowed the synthesis of the complete series of ferrocene-based N-heterocyclic tetrylenes fc[(N{B})2E] (fc = 1,1'-ferrocenediyl, {B} = (HCNC6H3-2,6-iPr2)2B, E = Si-Pb). The silylene fc[(N{B})2Si] is inert towards NH3, CO2 or N2O under ambient conditions and thus significantly less reactive than the N-aryl homologue fc[(NC6H3-2,6-iPr2)2Si]. In accord with its higher reactivity, computational results indicate a more pronounced ambiphilicity of fc[(NC6H3-2,6-iPr2)2Si]. Our computational investigation of the model compound fc[(NBMe2)2Si] suggests that silylenes of this type may be superior to fc[(NC6H3-2,6-iPr2)2Si] in terms of ambiphilicity.

A General Strategy for Increasing the Air Stability of Phosphines Including Primary Phosphines.

A general approach for increasing the air-stability of various primary phosphines in the absence of kinetic stabilization is presented that contrasts with previous interpretations, which were limited to specific phosphines. This contribution shows the synthesis of a series of air-stable primary phosphines Fc(CH2 )n PH2 , where n=0,1,2,3; and Fc=ferrocenyl, and their corresponding isolable primary phosphine oxides. It was demonstrated that the ferrocene moiety exerts an antioxidant effect on the primary phosphine group, which is intermolecular, solvent dependent and increases with the electron density on the ferrocene moiety. Furthermore, we demonstrated that the presence of ferrocene in solution also inhibits the oxidation of other secondary and tertiary phosphines in air. Together our findings suggest that quenching of singlet oxygen is the actual reason for the antioxidant effect; this was experimentally confirmed by using other established singlet oxygen quenchers, thus demonstrating a key role of singlet oxygen in the aerobic oxidation of phosphines.

Reduction Behavior of Anisyl-substituted P-Ferrocenyl Phospholes.

P-Ferrocenylphospholes with differing substituents in α-position have been synthesized and their identity and purity was confirmed using multinuclear NMR spectroscopy, MS, elemental analysis and single crystal X-ray diffraction. Furthermore, the redox properties have been explored with electrochemical measurements. Transferring the reduction to a preparative scale using lithium leads to reductive P-C bond cleavage furnishing the corresponding phospholide which has been transformed to P-tert-butyl substituted phosphole. In addition to phospholide formation reductive demethoxylation with transformation of the anisyl substituent to its phenyl analog was observed. For comparison analogous reactions have been explored for the respective P-phenylphospholes which show a different reactivity.

Ferrocene-Based N-Heterocyclic Plumbylenes [Fe{(η5 -C5 H4 )NSiMe2 R}2 Pb:]: Influence of the Steric Demand of the N-Substituents on Their Dimerization via C-H Activation with PbII.

Ferrocene-based N-heterocyclic plumbylenes fc[(NSiMe2 R)2 Pb:] (1; fc=1,1'-ferrocenylene) are easily accessible by transamination from [(Me3 Si)2 N]2 Pb and the corresponding 1,1'-diaminoferrocene derivatives fc(NHSiMe2 R)2 . They may form unconventional dimers 2 by a process, which causes the cleavage of a cyclopentadienyl C-H bond and the formation of a Pb-C and an N-H bond. The monomer-dimer equilibrium (2 1⇆2) has been addressed experimentally and computationally. It critically depends on the steric demand of the N-substituents SiMe2 R, which has been varied systematically by using homologues with aliphatic (R=methyl, ethyl, isopropyl, tert-butyl) and aromatic units (R=phenyl, mesityl, ferrocenyl). Even in the sterically least congested case (R=methyl), dimerization is only slightly exergonic. It eventually becomes prohibitively endergonic with increasingly larger substituents and is thus not observed for R=tert-butyl, mesityl, and ferrocenyl. R=phenyl represents a borderline case, where the dimer is still detectable in the equilibrium mixture, albeit as a very minor component, in accord with the slightly endergonic Gibbs free energy change calculated for its formation. Addition of 4-dimethylaminopyridine (DMAP) to the monomer-dimer equilibrium mixtures cleanly affords the corresponding adducts [1(DMAP)], irrespective of the equilibrium composition.

Gradual Donor Stabilization of a Transient Ferrocene Bridged Bisphosphanyl Phosphenium Cation.

A transient phosphenium cation embedded into a [3]ferrocenophane scaffold was formed via chloride abstraction. The cation has been trapped with phosphane, carbene, and silylene donors resulting in stable adducts or bond activation of the ferrocenophane bridge. In the absence of donors, dimerization of the phosphenium cation to the corresponding dication is observed or P-C bond activation with migration of a substituent leading to a putative phosphoniodiphosphene. Using 1,3-di-tert-butylimidazol-2-silylene as the donor, further reaction of the initially formed chlorosilane leads to activation of a P-P bond of the ferrocenophane scaffold with ring expansion of the ansa-bridge. The donor formation and bonding situation are investigated by density functional theory calculations as well as experimental methods (e.g., NMR spectroscopy and X-ray crystallography).

A crystalline cyclic (alkyl)(amino)carbene with a 1,1'-ferrocenylene backbone.

Cyclic (alkyl)(amino)carbenes with a 1,1'-ferrocenylene backbone (fcCAACs) are established as an original family by the preparation of a crystalline congener. The Ccarbene bond angle is unprecedentedly wide for a CAAC, causing an exceptionally pronounced ambiphilicity. The redox-active backbone opens the door to unconventional metalloradicals and oligoradicals.

Asymmetrically Substituted Phospholes as Ligands for Coinage Metal Complexes.

A series of coinage metal complexes asymmetrically substituted 2,5-diaryl phosphole ligands is reported. Structure, identity, and purity of all obtained complexes were corroborated with state-of-the-art techniques (multinuclear NMR, mass spectrometry, elemental analysis, X-ray diffraction) in solution and solid state. All complexes obtained feature luminescence in solution as well as in the solid state. Additionally, DOSY-MW NMR estimation experiments were performed to achieve information about the aggregation behavior of the complexes in solution allowing a direct comparison with their structures observed in the solid state.

Reactions of Mesityl Azide with Ferrocene-Based N-Heterocyclic Germylenes, Stannylenes and Plumbylenes, Including PPh2 -Functionalised Congeners.

The reactivity of ferrocene-based N-heterocyclic tetrylenes [{Fe(η5 -C5 H4 -NSitBuMe2 )2 }E] (E=Ge, Sn, Pb) towards mesityl azide (MesN3 ) is compared with that of PPh2 -functionalised congeners exhibiting two possible reaction sites, namely the EII and PIII atom. For E=Ge and Sn the reaction occurs at the EII atom, leading to the formation of N2 and an EIV =NMes unit. The germanimines are sufficiently stable for isolation. The stannanimines furnish follow-up products, either by [2+3] cycloaddition with MesN3 or, in the PPh2 -substituted case, by NMes transfer from the SnIV to the PIII atom. Whereas [{Fe(η5 -C5 H4 -NSitBuMe2 )2 }Pb] and other diaminoplumbylenes studied are inert even under forcing conditions, the PPh2 -substituted congener forms an addition product with MesN3 , thus showing a behaviour similar to that of frustrated Lewis pairs. The germylenes of this study afford copper(I) complexes with CuCl, including the first structurally characterised linear dicoordinate halogenido complex [CuX(L)] with a heavier tetrylene ligand L.

Planar-chiral 1,1'-diaminoferrocenes.

Planar-chiral homologues of 1,1'-diaminoferrocene, which bear a single additional substituent adjacent to one of the amino groups, are prepared as racemic mixtures in a few steps and in good yields from ferrocene. Various substituents relevant to steric shielding, coordination and further functionalisation are used, giving access to ferrocene-based planar-chiral diimines and diamines as well as stable N-heterocyclic carbenes and tetrylenes by transformations analogous to procedures established for 1,1'-diaminoferrocene.

Reactivity of an N-heterocyclic silylene with a 1,1'-ferrocenediyl backbone towards carbonyl compounds, including carbon suboxide.

Reactions of a silylene with a ketene and with carbon suboxide are reported, respectively leading to the first silaallene oxide and to a silylketene, whose reaction with water affords the first structurally characterised stable methyleneketene and constitutes a unique type of single-crystal-to-single-crystal transformation of a molecular solid by a stoichiometric gas-solid chemical reaction.

Trifunctional Silyl Groups as Anchoring Units in the Preparation of Luminescent Phosphole-Silica Hybrids.

A synthetic strategy to ß-silylphospholes with three methoxy, ethoxy, chloro, hydrido, or phenyl substituents at silicon has been developed, starting from trimethoxy, triethoxy, or triphenyl silyl substituted phenyl phosphanides and 1,4-diphenyl-1,3-butadiyne. These trifunctional silylphospholes were attached to the surface of uniform spheric silica particles (15 µm) and, for comparison, to a polyhedral silsesquioxane (POSS)-trisilanol as a molecular model to explore their luminescent properties in comparison with the free phospholes. Density functional theory calculations were performed to investigate any electronic perturbation of the phosphole system by the trifunctional silyl anchoring unit. For the immobilized phospholes, cross-polarization magic-angle-spinning NMR measurements (13C, 29Si, and 31P) were carried out to explore the bonding situation to the silica surface. Thermogravimetric analysis and X-ray photoelectron spectroscopy measurements were performed to approximate the amount of phospholes covering the silica surface. Identity and purity of all novel phospholes have been established with standard techniques (multinuclear NMR, mass spectrometry, and elemental analysis) and X-ray diffraction for the POSS derivative.

Total Synthesis via Biomimetic Late-Stage Heterocyclization: Assignment of the Relative Configuration and Biological Evaluation of the Nitraria Alkaloid (±)-Nitrabirine.

The racemic total synthesis of nitrabirine (5) together with its previously undescribed epimer 2-epi nitrabirine (5') is accomplished via a six-step route based on a biomimetic late-stage heterocyclization. This allowed the assignment of the relative configuration of nitrabirine by the lanthanide-induced shifts (LIS) experiment, which was later on confirmed by X-ray diffraction of obtained single crystals. Furthermore, oxidation studies demonstrated that the direct N-oxidation of nitrabirine does not yield nitrabirine N-oxide as reported earlier. In contrast, the reaction of hydrogen peroxide with nitrabirine (5) yields the salt 24', whereas 2-epi nitrabirine (5') surprisingly leads to a previously uncharacterized product 22 under the same conditions. Finally, a Fischer indole reaction gave access to novel tetracyclic nitrabirine derivatives 26a-d. A comprehensive biological evaluation of nitrabirine (5), 2-epi nitrabirine (5'), and all derivatives synthesized in this study revealed general biofilm dispersal effects against Candida albicans. Moreover, specific compounds showed moderate antibacterial activities as well as potent cytotoxic activities.

Phosphetes via Transition Metal Free Ring Closure - Taking the Proper Turn at a Thermodynamic Crossing.

A transition metal free route to phosphetes featuring an exocyclic alkene unit is presented. In this approach phosphanides are added to a variety of diynes generating phosphaallylic intermediates which depending on the reaction conditions transform either to phosphetes or the corresponding phospholes. Investigation of the reaction mechanism by combined quantum chemical and experimental means identifies phosphole formation as thermodynamically controlled reaction path, whereas kinetic control furnishes the corresponding phosphetes. Structural and luminescence properties of the rare class of phosphetes are explored, as well as for selected key intermediates.

C2-Symmetric P-Stereogenic Ferrocene Ligands with Heavier Chalcogenophosphinous Acid Ester Donor Sites.

tert-Butyl-substituted diphospha[2]ferrocenophane was used as a stereochemically confined diphosphane to investigate the addition of various dichalcoganes (R2Ch2; Ch = S, Se, Te and R = Me, Ph). Bischalcogenophosphinous acid esters bearing four soft donor sides were obtained as a mixture of rac and meso diastereomers and characterized by means of multinuclear NMR and X-ray analysis. The coordination chemistry of multidentate ligand 3b was explored toward d10 coinage metal centers (Cu(I), Ag(I), and Au(I)), yielding various bimetallic complexes.

Azido-Functionalized Aromatic Phosphonate Esters in RPOSS-Cage-Supported Lanthanide Ion (Ln = La, Nd, Dy, Er) Coordination.

Within this work, a modified preparation of diethyl 4-azidobenzylphosphonate (L1) is presented and the family of 4- or 4'-azido-substituted aromatic phosphonate esters is increased by three new ligand platforms: diisopropyl 4-azidobenzylphosphonate (L2), diisopropyl ((4'-azido-[1,1'-biphenyl]-4-yl)methyl)phosphonate (L3), and diisopropyl 4-azido-2,3,5,6-tetrafluorobenzylphosphonate (L4), which exhibit an anomalous splitting of the N3 stretching vibrations. Subsequent coordination to the in situ generated RPOSS (polyhedral oligomeric silsesquioxane)-cage-supported lanthanide precursors [(Ln{RPOSS})2(THF)m] (P1-P6) (Ln = La, Nd, Dy, Er; R = iBu, Ph; m = 0, 1) yields complexes of the general formula [Ln{RPOSS}(L1-L4)n(S1)x(THF)m] (1-30) (n = 2, 3; x = 0, 1; m = 0-2) retaining the azide unit for future semiconductor surface immobilization. Because the latter compounds are mostly oils or viscous waxes, preliminary solution-state structure elucidations via DOSY-ECC-MW estimations have been carried out which are in accordance with 1H NMR integral ratios as well as solid-state structures, where available. Moreover, the optical properties of the Nd, Dy, and Er derivatives of complexes 1-30 are examined in the visible and NIR spectral regions, where applicable.

A Stable N-Heterocyclic Silylene with a 1,1'-Ferrocenediyl Backbone.

The N-heterocyclic silylene [{Fe(η5 -C5 H4 -NDipp)2 }Si] (1DippSi, Dipp=2,6-diisopropylphenyl) shows an excellent combination of pronounced thermal stability and high reactivity towards small molecules. It reacts readily with CO2 and N2 O, respectively affording (1DippSiO2 )2 C and (1DippSiO)2 as follow-up products of the silanone 1DippSiO. Its reactions with H2 O, NH3 , and FcPH2 (Fc=ferrocenyl) furnish the respective oxidative addition products 1DippSi(H)X (X=OH, NH2 , PHFc). Its reaction with H3 BNH3 unexpectedly results in B-H, instead of N-H, bond activation, affording 1DippSi(H)(BH2 NH3 ). DFT results suggest that dramatically different mechanisms are operative for these H-X insertions.